Memmert HPP 108/749 Constant climate chamber (Generation 2003) User Manual
Page 42
42
Advanced functions
Date
The controller contains a calendar which automatically
accounts for the different lengths of months, and for leap
years.
Weekday
Tu
Year
Adjustment range: from 2000 to 2100
Acoustic signal at programme end
ENDSOUND
Setting: OFF or ON
Acoustic Signal for alarm, e.g. over/undertemperature
ALARM sound
Setting: OFF or ON
Communication address
Adjustment range: 0 to 15 (see chapter „ Communication
interfaces “ on page 50 )
Ratio between upper and lower heat (only for constant cli-
mate chambers HPP 749)
Adjustment range: -50% to +50% (see also chapter Heat
output distribution (BALANCE) on page 47 )
Tolerance band ASF
Adjustment range: 2 to 20 °C (see page 45 )
Language
Setting: GERMAN, English, franCAIS, ESPANOL and italIANO
Compensation correction values (CAL 1-3, rh20, RH90) for
customer-side calibration of temperature and humidity (see
chapter “ Heat output distribution (BALANCE) “ on page 47 ).
Close setup
Save all settings and leave the SETUP mode