Lenze E84AYCEC - Manual (Page 64)

E84AYCEC communication manual (Ethernet POWERLINK)
Error messages
Possible causes and remedies
64
L
EDS84AYCEC EN 3.0 - 09/2012
EPL: Watchdog reset [0x01bc6011]
EPL: Software error [0x01bc6100]
EPL: Fatal software error [0x01bc6101]
EPL: PDO Mapping invalid [0x01bc6110]
EPL: Invalid parameter set [0x01bc641f]
EPL: Factory settings loaded [0x01bc6420]
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Communication module is defective. Send the communication module and a description of
the fault to Lenze.
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Communication module is defective. Send the communication module and a description of
the fault to Lenze.
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Communication module is defective. Send the communication module and a description of
the fault to Lenze.
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  warning  Information
Cause Remedy
Invalid mapping configuration. Correct the mapping configuration.
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  warning  Information
Cause Remedy
Loading of an active parameter set was not possible. Redownload the application (incl. module).
Response (Lenze setting in bold) Setting: not possible
 None  System fault  Fault  Trouble  Quick stop by trouble  Warning locked  warning  Information
Cause Remedy
Access via standard device to the parameter set in the
memory module failed.
Redownload the application (incl. module).