Lenze E84AYCEC - Manual (Page 11)

EDS84AYCEC EN 3.0 - 09/2012
L
11
E84AYCEC communication manual (Ethernet POWERLINK)
Safety instructions
General safety and application instructions
2 Safety instructions
2.1 General safety and application instructions
 Lenze drive and automation components ...
– must only be used as directed.
 Application as directed
( 13)
– must never be commissioned in the event of visible damage.
– must never be technically modified.
– must never be commissioned before they have been mounted completely.
– must never be operated without the required covers.
– can - depending on the degree of protection - have live, movable or rotating parts
during and after operation. Surfaces can be hot.
 For Lenze drive components ...
– use only the accessories approved.
– use only original spare parts from the manufacturer.
 Observe all specifications given in the attached and associated documentation.
– This is the precondition for safe and trouble-free operation and for achieving the
product features specified.
 Features ( 14)
– The procedural notes and circuit details described in this document are only
proposals. It is up to the user to check whether they can be adapted to the particular
applications. Lenze does not take any responsibility for the suitability of the
procedures and circuit proposals described.

Note!
Always observe the specified safety measures to prevent severe injury to
persons and damage to property!
Always keep this documentation near the product during operation.

Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets!