Kinze 3660 Lift and Rotate Planter Rev. 7/14 - Manual (Page 33)

TM
Model 3660 M0217-01
Rev. 7/11 2-21
Machine Operation
1. Highlight and select either L (left) or R (right) for the
appropriate input screen.
2. At input screen, L or R side is indicated at left side of screen
and seed weight or acres remaining is on right side.
3. Press arrow keys to select desired box; press
SELECT to darken and use arrow keys to change.
NOTE: Seed information entered must be accurate
for remaining estimated acres to calculate correctly.
• SEEDS/ACRE is population rate.
• SEEDS/LB value comes from seed specifications.
• ZERO is selected to zero hopper that is selected.
4. Select BACK to return to main screen.
ENTER SEED INFORMATION
Seed weight or acres
The Cobalt electronic seed monitor system consists of a
tractor-mounted console, seed tubes with computerized
sensors installed in each planter row unit, a primary harness
connecting console to planter harness, and a planter
harness (junction Y-harness and/or harness extension where
applicable), connected to each seed tube sensor.
Cobalt monitor is built to withstand harsh environments
associated with today’s agricultural industry. The weathertight
enclosure seals out dirt and moisture encountered during
normal operating conditions
This system is compatible with all Kinze planters, and can be
transferred between multiple vehicles to maximize return on
investment.
KINzE CObALT SYSTEM
The Cobalt system allows manual control of air clutches and variable population control when planter is equipped with
these options. It is not GPS compatible.
NOTE: See Kinze Cobalt operator manual for installation and programming.
Kinze Cobalt display