INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 8)

8
tira93e1 (2014-04) BPG402-SE.cp
3 Operation
Via the EtherCAT interface, the following and further data are exchanged in the
standardized EtherCAT protocol:
• Pressure
reading
• Pressure unit (Torr, mbar, Pa)
• Status and error messages
• Status of the switching functions
• Set Trip Point for switching functions
Caution
Caution: data transmission errors
Any attempt to simultaneously operate the gauge via the RS232C
Serial Interface and EtherCAT interface may result in incorrect data
and data transmission errors.
Therefore, it is inadmissible to simultaneously operate the gauge via
the RS232C Serial Interface and EtherCAT interface.
Position Label Function
1 x1 Address Switch × 1, hexadecimal
2 x10 Address Switch × 10, hexadecimal
3 FIL Fullscale adjustment push button
4 RUN EtherCAT Status LED
5 ERR Error LED
6 IN EtherCAT IN connector
7 LA Link activity EtherCAT IN
8 OUT EtherCAT OUT connector
9 LA Link activity EtherCAT OUT
10 PWR Sensor cable connector
(Power, analog I/O, RS232C I/O and Relay contacts)
3.1 Introduction
3.2 Front and Side View
5
6
4
8 10
7
9
1
2
3