INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 18)

18
tira93e1 (2014-04) BPG402-SE.cp
Calculating the High Trip Point and Low Trip Point → 4.4.7.
Index SI DataType NV Access PM Name
800F 0x01 BOOL x RW High Trip Enable TP2
0x02 BOOL x RW Low Trip Enable TP2
0x04 BOOL x RW Override Enable TP2
0x05 BOOL x RW Override High Trip TP2
0x06 BOOL x RW Override Low Trip TP2
0x11 REAL x RW High Trip Point Limit TP2
0x12 UDINT x RW High Trip Source Index
TP2
0x13 REAL X RW Percentage High Trip
Source TP2
0x14 REAL x RW Low Trip Point Limit TP2
0x15 UDINT x RW Low Trip Source Index
TP2
0x16 REAL x RW Percentage Low Trip
Source TP2
0x17 REAL x RW High Trip Hysteresis TP2
0x18 REAL x RW Low Trip Hysteresis TP2
0x1A UDINT x RW Source Index TP2
High Trip Point
0
1 Disable
Enable
Low Trip Point
0
1 Disable
Enable
Override Enable
0
1 Disable
Enable
Override High Trip
0
1 Disable
Enable
Override Low Trip
0
1 Disable
Enable
High Trip Point limit: High limit to trigger trip point condition if Input Value (I 0x900F,
SI 0x01) is above this limit.
Object index of High Trip Point Value source. Index of High Trip Point Limit (I
0x800F, SI 0x11)
Bit 16…31: Index
Bit 08…15: Subindex
Bit 00…07: reserved
It is only possible to reference to "High Trip Point Limit" (I 0x800F, SI 0x11).
4.5.3 Configuration Trip
Point 2
Subindex 0x01
Subindex 0x02
Subindex 0x04
Subindex 0x05
Subindex 0x06
Subindex 0x11
Subindex 0x12