INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 30)

30
tira93e1 (2014-04) BPG402-SE.cp
Status (supported values)
0
1
2
3
255
Reserved
Reserved
Last command completed, error, no response
Reserved
Command is executing
Response
Byte 0
See Subindex 0x02
Byte 1 Unused
Execution of this command clears the latched exceptions.
Index SI DataType NV Access PM Name
FBF1 0x01 V_STRING(5) RW Command
0x02 BYTE RO Status
0x03 V_STRING(2) RO Response
A exception reset is initiated when the following byte sequence is sent.
Command
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
0x74
0x65
0x73
0x65
0x72
Status (supported values)
0
1
2
3
255
Last command completed, no error, no response
Reserved
Last command completed, error, no response
Reserved
Command is executing
Response
Byte 0
See Subindex 0x02
Byte 1 Unused
Execution of this command will store all parameters to non-volatile memory. If a
device automatically saves all non-volatile parameters at the time they are set, this
command will not take any action.
Index SI DataType NV Access PM Name
FBF2 0x01 V_STRING(4) RW Command
0x02 BYTE RO Status
0x03 V_STRING(2) RO Response
Subindex 0x02
Subindex 0x03
4.7.19 Exception Reset
Command
Subindex 0x01
Subindex 0x02
Subindex 0x03
4.7.20 Store Parameters
Command