INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 13)

tira93e1 (2014-04) BPG402-SE.cp
13
Indicates whether the Value parameter contains a value in over range.
Reading Valid Module 1
0 No Overrange Exceeded
1 Overrange Exceeded
Indicates whether the Value parameter contains a value in under range.
Reading Valid Module 1
0 No Underrange Exceeded
1 Underrange Exceeded
Index SI DataType NV Access PM Name
6010 0x0E BOOL RO tx TxPdoState Module 2
0x11 REAL RO tx Sensor Value Module 2
Is set if the device is not in Safe State (value (I 0x6010, SI 0x11) = valid)
TxPdoState Module 2
0
1 Invalid
Valid
The corrected, converted, calibrated final analog input value of the sensor.
Index SI DataType NV Access PM Name
6015 0x01 BOOL RO tx Reading Valid Module 2
0x02 BOOL RO tx Overrange Exceeded
Module 2
0x03 BOOL RO tx Underrange Exceeded
Module 2
0x05 BOOL RO tx Emission Status Off/On
Module 4
0x06 BOOL RO tx Degas Status Off/On
Module 4
Indicates whether the Value parameter contains a valid value within the specified
accuracy or not.
Reading Valid Module 2
0 Invalid
1 Valid
Indicates whether the Value parameter contains a value in over range.
Reading Valid Module 2
0 No Overrange Exceeded
1 Overrange Exceeded
Subindex 0x02
Subindex 0x03
4.4.3 Input Common
Subindex 0x0E
Subindex 0x11
4.4.4 Input Hot Cathod Ion
Subindex 0x01
Subindex 0x02