INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) User Manual
Page 2
2
tira93e1 (2014-04) BPG402-SE.cp
Caution
Caution: data transmission errors
Any attempt to simultaneously operate the gauge via the RS232C
Serial Interface and EtherCAT interface may result in incorrect data
and data transmission errors.
Therefore, it is inadmissible to simultaneously operate the gauge via
the RS232C Serial Interface and EtherCAT interface.
This Communication Protocol contains instructions for operating EtherCAT inter-
faces (slaves) together with a master.
For safety information, specifications and operation instructions of the
vacuum gauges refer to the appropriate documents (
→ [1], [2], [3]).
The following description of the EtherCAT
®
interface is compliant to the EtherCAT
specification of the EtherCAT Technology Group (ETG) and to the "EtherCAT
®
Semiconductor Device Profile".
This manual describes the functionality of a EtherCAT slave and supports
• ETG.5003 Part 1: Common Device Profile (CDP) V0.9.0 (→ [12]) and
• ETG.5003 Part 2080: Specific Device Profile (SDP) Vacuum Pressure Gauge
V0.4.4 (
→ [13]).
We reserve the right to make technical changes without prior notice.
In all communications with INFICON, please specify the information on the product
nameplate. For convenient reference copy that information into the space provided
below.
INFICON AG, LI-9496 Balzers
Model:
PN:
SN:
V W
General Information
Intended Use
EtherCAT–Interface
Product Identification