INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 20)

20
tira93e1 (2014-04) BPG402-SE.cp
According to these definitions, 4 points are defined:
1
Lowest informational measurement value
2 Lowest precision measurement value
3 Highest precision measurement value
4 Highest informational measurement value
Index SI DataType NV Access PM Name
9000 0x02 REAL x RO Highest Informational
Measurement Value Module 1
0x03 REAL x RO Highest Precision Measurement
Value Module 1
0x04 REAL x RO Lowest Precision Measurement
Value Module 1
0x05 REAL x RO Lowest Informational
Measurement Value Module 1
Highest Informational Measurement Value: Highest value that the gauge can
measure without a specified accuracy.
Highest Precision Measurement Value: Highest valid value at which the gauge is
specified with an accuracy value. Above that value, the parameter Reading Valid is
set to invalid.
Lowest Precision Measurement Value: Lowest valid value at which the gauge is
specified with an accuracy value. Below that value, the parameter Reading Valid is
set to invalid.
Lowest value the gauge can measure without a specified accuracy.
Index SI DataType NV Access PM Name
9003 0x01 UINT RO Sensor Warning Module 1
0x02 UINT RO Sensor Alarm Module 1
Sensor Warnings
Bit 0
Bit 1
Bit 2…15
0
Electronics Warning
0
Sensor Alarms
Bit 0
Bit 1
Bit 2…15
0
Electronics Failure
0
Subindex 0x02
Subindex 0x03
Subindex 0x04
Subindex 0x05
4.6.1 Information Heat
Transfer
Subindex 0x01
Subindex 0x02