INFICON BPG402-SE ATM to Ultra-High Vacuum Gauge (EtherCAT) - Manual (Page 22)

22
tira93e1 (2014-04) BPG402-SE.cp
Index SI DataType NV Access PM Name
900E 0x01 REAL RO Input Value Trip Point 1
900F 0x01 REAL RO Input Value Trip Point 2
Input Value Trip Point 1: Trip Point Input value as referenced by Source Index (I
0x800E, SI 0x0E).
Input Value Trip Point 2: 0 Trip Point Input value as referenced by Source Index (I
0x800F, SI 0x0E).
Index SI DataType NV Access PM Name
F000 0x01 UINT RO Index Distance
0x02 UINT RO Maximum Number of
Modules
Index Distance: Index offset between PDO entries of two consecutive modules (for
ETG.5003 = 0x10), e.g. 0x6000, 0x6010.
Maximum Number of Modules: For the BPG402 this value always is 2.
Index SI DataType NV Access PM Name
F010 0x01 UDINT RO Profile Number Module 1
0x02 UDINT RO Profile Number Module 2
Each sub-index lists the profile-number of the corresponding module.
Each sub-index lists the profile-number of the corresponding module.
Index SI DataType NV Access PM Name
F380 USINT RO tx ActiveException Status
Active Exception Status
Bit 0
Device Warning
Bit 1 Manufacturer Warning
Bit 2 Device Error
Bit 3 Manufacturer Error
Bit 4…7 0
4.6.4 Information Trip
Point 1/2
Subindex 0x01 (900E)
Subindex 0x01 (900F)
4.7 Device Area
(0xF000...0xAFFF)
4.7.1 Semiconductor Device
Profile
Subindex 0x01
Subindex 0x02
4.7.2 Module Profile List
Subindex 0x01
Subindex 0x02
4.7.3 Exceptions
4.7.4 Active Exception Status
Active Exception Status