INFICON Explorer Portable Gas Chromatograph - Manual (Page 72)

Explorer Operator Manual
70
Setting Probe Length
If you are doing a loop injection you can choose one of two sample probes or no
probe at all.
NOTE: If you are using the long probe or the extended probe you must allow for a longer
pump time so that the sample can be drawn through the sampling probe. The pump
time is set automatically when you select the probe.
To set the probe length:
1. Press Enter Menu then SETUP, MODE, and INJECT.
2. Press PROBE and use the up and down arrow keys to select the desired probe.
Select short if you are not using a probe or if you are using the gas bag adapter.
The long sample line is 3 meters (m) long. The telescoping extended sample
probe is 5 m long and has a telescoping handle.
3. Press Enter Menu to confirm your selection, press Exit to close the box and
return to the menu, and press Enter Menu to close the menu.