INFICON Explorer Portable Gas Chromatograph - Manual (Page 128)

SiteChart Software
126
7. When the run is complete, SiteChart will save the run to a directory it has
created for the instrument.
Stopping a Run
Once the run has been started the button changes to a stop button. To stop the
analysis before it is complete, press
Stop . If you stopped the analysis after the
sample was injected onto the column you must wait for the duration of the analysis
time. The column will be flushed to remove any compounds that entered the
column.
When you stop an analysis, Explorer will flush the column for the duration of
the analysis time before beginning another analysis on the same column.
Saving a Run
All runs are saved automatically when they are received from the instrument.
Explorer creates the file name as described in File Name Format on page 131. To
save the file with a new name, use the Save As command. Use Save when you have
edited a file and need to update it.
To update an existing file:
1. Select the Instrument tab.
2. Open the File menu and select Save (Alt, F, S).
The displayed file will be saved with the current file name.
To save a file with a new name or to save an existing file to a new location:
1. Select the Instrument tab.