INFICON Explorer Portable Gas Chromatograph - Manual (Page 68)

Explorer Operator Manual
66
Entering a Tag
A tag may be used to identify certain sampling location or a certain sample in the
datalogger. You can enter a tag to indicate a change of location or a change in
personnel.
To enter a tag:
1. Press Enter Menu then SETUP and TAG.
2. Use the arrow keys to enter a name or number.
The tag can use up to 10 characters.
3. Press Enter Menu to confirm the tag.
4. Press Enter Menu to close the menu.
The tag you enter here will identify both GC and TVOC analyses. You can
enter a new tag for every analysis or you can enter a single tag for a group of
analyses.
A pop up box will prompt you to enter a tag when you begin the first run after
the instrument has been turned on.