INFICON Explorer Portable Gas Chromatograph - Manual (Page 258)

Maintenance and Troubleshooting
256
1. Turn Explorer off.
2. Attach the AC adapter to Explorer must be connected to the AC adapter
in order to download firmware.
3. Connect Explorer to the PC as described in Connecting the PC to Explorer on
page 96.
4. Open your communications software.
If you are using HyperTerminal, start Windows and then start HyperTerminal.
HyperTerminal may be in the Accessories Program Group. Its location will
depend on how you have set up Windows. Double-click Hypertrm.exe to run
the program.
5. Create and save a configuration file, so that each time you use the
communications software with Explorer you can load this file. Enter a name for
your configuration file, then select an icon and press OK.
6. In HyperTerminal, the Phone number dialog box will now open, move to the
last option, Connect Using and select direct connection .
7. Select the port to which Explorer is connected and click OK .
Select COM2 if you are using COM2.
8. Set the following:
Bits per Second (bps) 9600
Data Bits 8
Parity None
Stop Bits 1
Flow Control None