beautypg.com

Install the wall plate, Station installation – ETC Echo Inspire Station User Manual

Page 8

background image

E T C I n s t a l l a t i o n G u i d e

Station Installation

Inspire Station Installation Guide

Page 8 of 8

Install the Wall Plate

The wall plate is secured to the station with magnets that are assembled to the
wall plate.

Step 4: If the wall plate does not fully attach automatically, wiggle the bottom

of the plate until all of the magnets are seated properly to the station
and the plate is secure.

N o t e :

When installing a multi-gang wall plate to a station and the

stations are not aligned properly in the back box, the wall plate will

not attach properly.
Loosen the screws that secure the station to the backbox, adjust

each station to improve the alignment, secure the screws, then

retry wall plate installation.

Step 1: Align the top of the wall plate to the station

and angle the bottom approximately 20

degrees.

Step 2: Hook the top of the wall plate to the tabs

located on the station electronics
assembly. To ensure the wall plate is
hooked properly on the top hook, wiggle it
slightly side to side.

Step 3: Swing the bottom of the wall plate down

until the magnets engage.