Configuration menu – Despatch Protocol 3 Controller User Manual
Page 45
Protocol 3 Controller
Owner’s Manual
W
ORKING WITH
O
PERATING
M
ODES
Version 1.2
45
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
5.6. Configuration Menu
Configuration provides access to menus that allow for setting up 11 different options:
1. Input: Input settings and calibrate for process and High Limit Inputs
2. Control
3. Output
4. Alarm
5. Power Fail Recovery
6. Comms. (Communication)
7. Recorder
8. Clock
9. Display
10. Lock Code Configuration
11. Reset to Defaults
Navigate the configuration menus options using the flowchart (Figure 18) or Table 15. Figure 18
shows the Protocol 3 Controller configuration options. Access the Configuration from the Main
Manu (Section 5.2.4):
1. Simultaneously press
and
.
2. Navigate to
Configuration Menu
using
or
3.
Press
to
Enter Configuration Menu
Mode Unlock Code.
4. Press
to reach
0010
,
the Mode Unlock Code.
5. Press
to display the configuration choices.
6. Navigate to the desired option using
and
.