Recorder control – Despatch Protocol 3 Controller User Manual
Page 40
W
ORKING WITH
O
PERATING
M
ODES
Protocol 3 Controller
Owner’s Manual
40
Version 1.2
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
Figure 13. Recorder Control.
Figure 14. Recorder Status.
5.4. Recorder Control
Use Recorder Control to start, stop and clear
recordings (Figure 13). Access the Recorder
Control from the Main Manu.
1. Navigate to and highlight
Recorder
Control
.
2. Press
to display
Recorder Control
Enter Data Recorder Unlock Code
screen.
3. Press
as necessary to enter Factory
Unlock Code 0010.
4. Press
to display the
Start/Stop Data
Recording
screen.
5. Press
or
to highlight and press
to
Stop Recording
or
Start Recording
.
The Recorder Status screen (Figure 14) displays
after selecting an option.
Clear a recording while in Recorder Status screen
by pressing
to advance to the
Clear
Recordings
screen.
All recordings in the unit can be downloaded to a USB device
using the USB port and the USB Menu.