Usb menu – Despatch Protocol 3 Controller User Manual
Page 41
Protocol 3 Controller
Owner’s Manual
W
ORKING WITH
O
PERATING
M
ODES
Version 1.2
41
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
5.5. USB Menu
Use
USB Menu
to perform read/write options for USB devices connected to the unit using the
front USB port (Figure 15). Access the USB Menu from the
Main Menu
.
See Table 14 for USB
Menus options.
Regularly backup critical system data according to your
company policies. Be sure to back up configuration and profiles
to a removable memory device. Refer to Section 5.5.1 for more
information.
Note that a memory stick must be in place before the USB Menu
will display.
1.
Navigate to and highlight
USB Menu
.
2.
Press
to display
Mode Unlock Code
screen
.
3. Press
as necessary to enter Factory Unlock Code 0010.
4.
Press
to display the
USB Menu
screen
.
Figure 15. USB Menu.