Dascom TallyCom III Installation & Operators Guide - Manual (Page 52)

TCP/IP Settings
TCP/IP : Enabled
FTP : Enabled
Host Name :
IP Lookup Method : Automatic, ( DHCP BOOTP RARP )
DHCP Server : 10.0.0.176
HTTP Timeout : 600
HTTP Port : 80
IP Address : 10.0.5.68
Subnet Mask : 255.255.0.0
Gateway : 10.0.0.2
WINS : Enabled
Status : Registered (10.0.0.176)
Primary WINS Server : 10.0.0.176
Secondary WINS Server : 0.0.0.0
Scope ID :
DNS Servers : 172.16.1.18
NetWare Settings
NetWare : Enabled
Frame Type : 802.2 (auto sensed)
NCP mode : Bindery
NCP Status : Connection Failure
Preferred Server :
Embedded PServer
Mode : Disabled
PU LU Settings
PU LU : Disabled
Block number : 05D
ID number : 00000
Local SAP : 04
Remote SAP : 04
Remote MAC : 020000000000
ida802.2 Settings
Alias Name :
Association Status : Not associated
NetBEUI Settings
NetBEUI : Enabled
Server Name : IDA22982B
Workgroup : WORKGROUP
Announce Interval : 12 min.
AppleTalk Settings
AppleTalk : Enabled
SNMP Settings
Authentication Traps : Enabled
Trap Destinations
(1) Community Name :
Host Address : 0.0.0.0
UDP Port # : 162
(2) Community Name :
Host Address : 0.0.0.0
UDP Port # : 162
(3) Community Name :
Host Address : 0.0.0.0
UDP Port # : 162
52