Dascom TallyCom III Installation & Operators Guide User Manual
Page 34
The SCS VCS command is supported.
Characters below 40 HEX not matching the valid SCS code table
below are passed directly to the printer, i.e. these characters should
have ASCII HEX values.
Characters in SCS TRN commands: Printable characters (Chars >
39 HEX) are treated as characters outside SCS TRN commands.
Characters below 40 HEX including those matching the valid SCS
code table below are treated as LU3 characters, i.e. these characters
are directly translated to ASCII HEX values by the use of the actual
translate table.
4
Emulating
another
Printserver
The SCS VCS command is supported.
Characters below 40 HEX not matching the valid SCS code table
below are printed as spaces.
Characters in SCS TRN commands: All characters are passed
directly to the printer, i.e. these characters should have ASCII HEX
values.
8
Emulating
another
Printserver
The SCS VCS command is supported.
Characters below 40 HEX not matching the valid SCS code table
below are suppressed.
Characters in SCS TRN commands: Printable characters (chars > 39
HEX) are treated as characters outside SCS TRN commands.
Characters below 40 HEX including those matching the valid SCS
code table below are printed as spaces.
EFFECT: Immediate.
RELATED: None.
NOTES:
1. This function only has effect on LU1 SCS datastream.
2. Where the SCS VCS command is not supported, one line feed is sent to the printer if an SCS
VCS command is received. Where the SCS VCS command is supported, as many line feeds
as required by the SCS VCS command are sent to the printer if an SCS VCS command is
received.
3. If an SCS SVF command is received outside page boundary, the page will not be ejected, but
the following line will be regarded as top of form on a page with the new form length.
4. Unprintable characters are LU1 HEX 00-3F with the exception of the SCS codes listed below:
Code
Name
HEX
ESC
SCS ESC character
(SHF, SVF, SLD, SPD, PPM)
2B
HT Horizontal
Tab
05
VT Vertical
Tab
0B
VCS Vertical
Channel
Select 04
LF Line
Feed
25
FF Form
Feed
0C
IRS Interrecord
Separator 1E
NL New
Line
15
CR Carriage
Return
0D
BS Back
Space
16
TRN Transparent
35
BEL Bell
2F
ENP Enable
14
INP Inhibit
24
GE Graphic
Escape
08
34