Dascom TallyCom III Installation & Operators Guide - Manual (Page 49)

8005 Wrong interrupt from COAX IF.
8006 No test response from COAX IF.
8007 Invalid test response from COAX IF.
8010 Nothing received in selftest
C.3 FLASH PROM Errors
Errors occurring during power-on:
CHECKSUM ERROR IN BOOT AREA
CHECKSUM ERROR IN FLASH MEMORY INFO AREA
CHECKSUM ERROR IN FLASH MEMORY
Errors during download:
Data errors:
ERROR IN HEX DATA
UNSUPPORTED FUNCTION %P
WRONG SEPARATOR IN FUNCTION %P
WRONG HEX DATA CHECKSUM
ERROR: NO VALID BOOT ID IN HEX DATA
Hardware errors:
ERROR: UNABLE TO ERASE FLASH MEMORY
ATTEMPT TO WRITE TO BOOT AREA, SYSTEM HALTED
ATTEMPT TO ERASE BOOT AREA, SYSTEM HALTED
Recoverable errors:
PROGRAMMING ABORTED. FLASH MEMORY NOT ERASED
The following is a message when the download procedure is completed successfully:
Successful downloading:
PREPARING DOWNLOAD TO FLASH MEMORY
%P2 RECEIVED, SCANNING HEX DATA
PROGRAMMING FLASH MEMORY
END OF HEX DATA RECORD RECEIVED
END OF FLASH
49