Dascom TallyCom III Installation & Operators Guide - Manual (Page 41)

SYNTAX: %Y61, n,%
OPTION DESCRIPTION
n User string ID number (0-7)
string
User string contents in HEX and/or
characters with apostrophe notation.
RELATED:
Y51, User Defined Strings at Power On.
Y57, User Defined Strings Before Local Copy
Z, Send User String
NOTES:
1. If the strings selected under functions 51 are not programmed, no data will be sent at
Printserver- or printer power on.
2. The apostrophe escape notation or HEX can be used in the programming of this function
3. Separators must be commas except for HEX data.
4. Please note that the length of a user string is limited by the size of the free user area in the
non-volatile memory. The actual size of the free user area is 4K.
5. This note applies to IBM 4226 only:
The user strings 0,1,2,3,4 are pre-programmed for use in connection with the downloading of
the font OCR-B. The factory default settings for these user strings may be overwritten for the
defining of other user strings. Use the function X3 to return to factory default settings. See
function Y51 for details.
EXAMPLES: %Y61,1,1B,32%
This will set the line spacing to 6 LPI in Epson LQ mode
FUNCTION 73: SELECT TRANSLATE TABLE
This function is used to select translate table to be used.
SYNTAX: %Y73,%
OPTION DESCRIPTION
*1-4 Number of the translate tables to be used
RELATED:
Y75, User Defined Translate Table
NOTES:
The standard translate table form the basis of the four supported translate tables.
Changes to this function will have immediate effect.
EXAMPLE: %Y73,2%
This
will select translate table 2.
FUNCTION 75: OVERWRITE TRANSLATE TABLE
Coax: This function is used to match the printer’s character table to the LU3 table.
Twinax: This function is used to match the printer’s character table to the EBCDIC (CP 500 ) table.
41