Dascom TallyCom III Installation & Operators Guide - Manual (Page 24)

37 United States
256 International
273 Austria/Germany
274 Belgium
275 Brazil
276 Canada/France
277 Denmark/Norway
278 Finland/Sweden
280 Italy
281 Japan (Latin)
282 Portugal
283 Spain
284 Spanish Speaking
285 United Kingdom
297 France
*500 Multinational
Coax
OPTION DESCRIPTION
*00 Download LU1 language from 3174 or 3274
control units (Configuration supports C or D only)
1 English (U.S.) EBCDIC
3 Austrian/German
4 Belgian
5 Brazilian
6 Canadian (French)
7 Danish/Norwegian
8 Danish/Norwegian (Alternate)
9 Finnish/Swedish
10 Finnish/Swedish (Alternate)
11 French
13 Austrian/German (Alternate)
14 International
15 Italian
16 Japanese (English)
19 Spanish
20 Spanish (Alternate)
21 Spanish speaking
22 English (UK)
28 Portuguese
30 French 105 character
31 Swiss German/Swiss French.
40 Spanish Data/Text Extension
NOTES:
1. Use the language number used in sequence number 121 in the IBM control unit configuration.
2. If option "00" has been selected and the controller does not download a character set, English
(U.S.) EBCDIC will be used.
3. Only has effect in LU1 data streams as language selected determines the LU1 to LU3
translate table to use.
Most LU1 characters will be available when function Y8 is set to 0 if the interface is connected
to a controller supporting download of the LU1 to LU3 translate table.
If the LU3 table does no contain the wanted characters, the characters can be defined with
function Y75, User Defined Translate Table.
4. If the escape character is used in an LU1 data stream and function Y8 is changed, the escape
character can be mapped to another LU3 value, if a language dependent character was used.
24