Atop Technology SE5001 Series User Manual

Page 94

User Manual Version 1.6

SE5001 Serial Device Server

Figure D.16 WebUI of the Serial Device Server

Configure by Telnet

Select

“Config by Telnet” in the submenu or click the on the Telephone button in the toolbar to launch the

telnet console connecting to the device.

Option

Configure SerialManager preferences in this dialog:

1. Set the SerialManager

’s scan interval

2. If device tip option is turned on, SerialManager will show additional information when the mouse cursor

stays on the device.

3. Select which Network Interface Card that SerialManager uses. If this option is set to DEFAULT,

SerialManger will use the default NIC that the operating system assigns.