Accept control command from com port, Backup eeprom to flash – Atop Technology SE5001 Series User Manual
Page 27
User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
26
Figure 3.18 Setting Packet Delimiter: Character Pattern
3.2.13. Accept Control Command from COM port
SE5001 can also accept serial control commands (RFC2217) directly from the COM port. For more detail about this
function, please contact our Technical Support for more information.
3.2.14. Backup EEPROM to Flash
Select “5” from “Input choice and enter (0~5):” the following screen should appear (Figure 3.19):
Figure 3.19 Backup EEPROM to Flash
Type 1
from “Input choice and enter (0~2):” to back up the settings from the EEPROM to the Flash.
SE5001 would then show
“EEPROM Backup (Yes)”.
Type 2
from “Input choice and enter (0~2):” to erase the settings stored in the Flash. SE5001 would
then show
“EEPROM Backup (No)”.