2 running serial/ip in windows – Atop Technology SE5001 Series User Manual

Page 51

User Manual Version 1.6

SE5001 Serial Device Server

4.2.2 Running Serial/IP in Windows

Find Serial/IP Control Panel from:

 Start->All Programs-> Serial/IP->Control Panel

 In the Windows Control Panel, open the Serial/IP applet.

 In the Windows notification area (Figure 4.5), right click in the Serial/IP tray icon and click on Configure

to open the Control Panel.

Figure 4.5 Serial/IP Notification Tray Icon

If no Virtual COM port is selected, a dialog will pop up and asks to select at least one port as the Virtual COM port
before proceeding (Figure 4.6).

Figure 4.6 Select Virtual COM Ports

After at least one Virtual COM port is seletected, the Control Panel will show (Figure 4.7).