Diagnostics, 1 use standard ping command – Atop Technology SE5001 Series User Manual
Page 69
User Manual Version 1.6
SE5001 Serial Device Server
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
68
6. Diagnostics
There are several ways to can check the status and availability of the serial device server.
6.1 Use Standard Ping Command
From the Windows Start menu, select Run
and type in “ping
If the serial device server can receive ping requests sent from the host, it will reply to the ping message (Figure
6.1). If the ping request cannot reach the serial device server, timed out message will show (Figure 6.2).
Figure 6.1 Successful Ping Reply
Figure 6.2 Ping Command Failed