3 application connectivity – Atop Technology SE5001 Series User Manual

Page 8

User Manual Version 1.6

SE5001 Serial Device Server

Optional Accessories

Name

Part Number

Description

DK-25

30200000000022G

DIN-Rail Kit

UN305-0510(US-DC)

50500051500001G

DC jack (1.35/3.5/7.5 mm) power adaptor,
100-240VAC input, 1.0A @ 5 VDC output, US plug

UNE305-0510(EU-DC)

50500051500011G

DC jack (1.35/3.5/7.5 mm) power adaptor,
100-240VAC input, 1.0A @ 5 VDC output, EU plug

US315-12(US-TB3)

70100000000027G

3-pin Terminal block (5.08 mm) power adaptor,
100-240VAC input, 1.25A @ 12VDC output, US plug

USE315-12(EU-TB3)

70100000000028G

3-pin Terminal block (5.08 mm) power adaptor,
100-240VAC input, 1.25A @ 12VDC output, EU plug

1.3 Application Connectivity

TCP Server Mode：

SE5001 can be configured as a TCP server in TCP/IP Network to listen for an incoming TCP

client connection to the serial device. After the connection is established between the serial device server and the

host computer, data can be transmitted in both directions. This also applies to Virtual COM running in the server

mode.

Figure 1.1 TCP Server Mode

TCP Client Mode：

SE5001 can be configured as a TCP client in TCP/IP Network to establish a connection with

a TCP server in the host computer. After the connection is established, data can be transmitted between serial
device and host computer in both directions. This also applies to Virtual COM running in the client mode.