AirLive WN-250R - Manual (Page 86)

2. System and Network Setup
77 AirLive WN-250R User’s Manual
2-7-1-5 Setup procedure for ‘AP Bridge – WDS’
In this mode, you can expand the scope of network by combining up to four other access
points together, and every access point can still accept wireless clients.
Here are descriptions of every setup items:
Band (2): Select the band you want to use, all the wireless routers must
use the same setting.
SSID (3): Input the SSID of your wireless router, the setting should be the
same with other wireless routers for the convenience of
roaming.
Channel Select the channel you want to use, all the wireless
Number (4): routers must use the same setting.
1
2
3
4
5
7
8
6
9
10
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.