AirLive WN-250R - Manual (Page 112)

4. Appendix
103 AirLive WN-250R User’s Manual
To enable NAT function, please select ‘Enable’ for ‘Enable NAT module function’ (1); to
disable, please select ‘Disable’.
After you made the selection, please click ‘Apply’ button (2) and the following message will
be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).