AirLive WN-250R - Manual (Page 101)

2. System and Network Setup
AirLive WN-250R User’s Manual 92
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
2-7-5 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless
network clients and this wireless router. You don’t have to select encryption mode and input
a long encryption passphrase every time when you need to setup a wireless client, you only
have to press a button on wireless client and this wireless router, and the WPS will do the
rest for you.
This wireless router supports two types of WPS: Push-Button Configuration (PBC), and PIN
code. If you want to use PBC, you have to push a specific button on the wireless client to
start WPS mode, and switch this wireless router to WPS mode too. You can push
Reset/WPS button of this wireless router, or click ‘Start PBC’ button in the web configuration
interface to do this; if you want to use PIN code, you have to know the PIN code of wireless
client and switch it to WPS mode, then provide the PIN code of the wireless client you wish
to connect to this wireless router. The detailed instructions are listed follow: