AirLive WN-250R - Manual (Page 100)

2. System and Network Setup
91 AirLive WN-250R User’s Manual
Delete All (3): If you want to delete all MAC addresses listed here,please
click ‘Delete All’ button.
Enable To enforce MAC address filtering, you have to check ‘Enable
Access Control (4): Wireless Access Control’. When this item is unchecked,
wireless router will not enforce MAC address filtering of wireless
clients.
MAC Address (5): Input the MAC address of your wireless devices here, dash ( - )
or colon ( : ) are not required. (i.e. If the MAC address label of
your wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or
‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’.
Comment (6): You can input any text here as the comment of this MAC
address, like ‘ROOM 2A Computer’ or anything. You can input
up to 16 alphanumerical characters here. This is optional and
you can leave it blank, however, it’s recommended to use this
field to write a comment for every MAC addresses as a memory
aid.
Add (7): Click ‘Add’ button to add the MAC address and associated
comment to the MAC address filtering table.
Clear (8): Click ‘Clear’ to remove the value you inputted in MAC address
and comment field.
After you finish with all settings, please click ‘Apply’ (9) button and the following message
will be displayed on your web browser: