AirLive WN-250R - Manual (Page 81)

2. System and Network Setup
AirLive WN-250R User’s Manual 72
Here are descriptions of every setup items:
Band (2): Please select the radio band from one of following options:
2.4 GHz (B) 2.4GHz band, only allows 802.11b wireless network
client to connect this router (maximum transfer rate
11Mbps).
2.4 GHz (N) 2.4GHz band, only allows 802.11n wireless network
client to connect this router (maximum transfer rate
150Mbps).
2.4 GHz (B+G) 2.4GHz band, only allows 802.11b and 802.11g
wireless network client to connect this router
(maximum transfer rate 11Mbps for 802.11b clients,
and maximum 54Mbps for 802.11g clients).
2.4 GHz (G) 2.4GHz band, only allows 802.11g wireless network
client to connect this router (maximum transfer rate
54Mbps).
2.4 GHz (B+G+N) 2.4GHz band, allows 802.11b, 802.11g, and
802.11n wireless network client to connect this
router (maximum transfer rate 11Mbps for 802.11b
clients, maximum 54Mbps for 802.11g clients, and
maximum 150Mbps for 802.11n clients).
NOTE: For 802.11b and 802.11g mode, the signals can be transmitted
only by antenna 1 (The antenna in the right side of the rear panel).
For 802.11n mode: The router is operating in a 1T2R Spatial
Multiplexing MIMO configuration. 1 antenna is for signal transmitting
and 2 antennas are for signal receiving.