AirLive WN-250R - Manual (Page 125)

4. Appendix
AirLive WN-250R User’s Manual 116
3-3-1 Access Control
This function allows or denies computers with specific MAC address from connecting to the
network; it can also allow or deny computers with specific IP address, protocol, or port.
Please click ‘Firewall’ menu on the left of web management interface, then click ‘Access
Control’, and the following message will be displayed on your web browser:
Here are descriptions of every setup items:
Enable MAC Check this box to enable MAC address based
Filtering (1): filtering, and please select ‘Deny’ or ‘Allow’ to decide the behavior of
MAC filtering table. If you select deny, all MAC addresses listed in
filtering table will be denied from connecting to the network; if you
select allow, only MAC addresses listed in filtering table will be able
to connect to the network, and rejecting all other network devices.
1
2 3
5 6
7
8 9 10
12
13 14 15
16
11
4