AirLive WN-250R - Manual (Page 121)

4. Appendix
AirLive WN-250R User’s Manual 112
Please click ‘NAT’ menu on the left of web management interface, then click ‘UPnP’, and
the following message will be displayed on your web browser:
There is only one option in this page, please select ‘Enable’ or ‘Disable’ to enable
or disable UPnP function, then click ‘Apply’ button, and the following message will be
displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.