AirLive WN-250R - Manual (Page 120)

4. Appendix
111 AirLive WN-250R User’s Manual
Delete All (12): Delete all settings existed in trigger port table.
Reset (13): Unselect all settings.
Note: Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click ‘Apply’ (14) button and the following message
will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on other setup
procedures, or click ‘Apply’ to reboot the router so the settings will take effect (Please wait
for about 30 seconds while the router is rebooting).
If you want to reset all settings in this page back to previously-saved value, please click
‘Cancel’ button.
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer communications, with
this function, network devices will be able to communicate with other devices directly, and
learn about information about other devices. Many network device and applications rely on
UPnP function nowadays.