AirLive WN-250R User Manual

Page 84

2. System and Network Setup

75 AirLive WN-250R User’s Manual

2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:

In this mode, you can connect your wireless router with another, to combine two access

points and expand the scope of wireless network, and all clients (wired only – AP will not

accept wireless clients in this mode) of two wireless routers will think they’re on the same

physical network. This function is very convenient when you need to connect two networks

between two buildings. Here are instructions about how to connect two wireless routers

together:

Here are descriptions of every setup items:

Band (2):

Select the band you want to use, two wireless routers must use the

same setting.

Channel

Select the channel you want to use, two wireless routers must use

Number (3):

the same setting.

MAC address 1(4):

Input the MAC address of another wireless router.

Security

Click to setting security for this connection (Please go to

Settings (5):

section ‘2-7-3 Wireless Security’ for detailed instructions).

NOTE: Two wireless routers must use the same mode, band, channel

number, and security setting!

1
2