AirLive ARM-104 v3 - Manual (Page 99)

AirLive ARM-104_v3 ADSL2/2+ Router 93
„ Destination IP: You can define the destination IP address to which your source IP will be banned
the access. Enter “0..0.0.0” for all.
„ Destination Netmask: Netmask of the destination IP. Enter “255.255.255.255” for all.
„ Port Stat: The starting port number that will be blocked for this application.
„ Port End: The ending port number that will be blocked for this application.
„ Protocol: There are five options available: TCP, UDP, TCP and UDP, ICMP, and Any.
„ Apply: Click Apply to complete the setting.
„ Cancel: Click Cancel to ignore all the changes.
„ To complete and save the setting, click Save All after clicking the Apply button.