AirLive ARM-104 v3 User Manual
Page 17
AirLive ARM-104_v3 ADSL2/2+ Router
11
2.2 Back Panel:
The back panel of the ARM-104_v3 ADSL2/2+ Router contains ADSL, Ethernet Switches, Reset and Power
Adapter connection.
ADSL
Port for connecting to the ADSL2/2+ Service Provider.
Ports 1~4
Four 10/100Mbps Ethernet Ports for connecting to the network devices
RESET
Restore the ARM-104_v3 ADSL2/2+ Router to factory default setting.
POWER
12V DC/1A or 9V AC/1A Power adapter connector.
Resetting Factory Defaults:
The reboot and restore to factory defaults feature will set the device to its factory default configuration by
resetting the ARM-104_v3 ADSL2/2+ Router.
To Reset the ARM-104_v3 ADSL2/2+ Router:
Ensure that the device is powered on.
Press the Reset button for 10~15 seconds and release. Wait for 30 seconds after release the Reset
button. Do not power off the device during the reset process.
The default settings are now restored after 30 seconds.
All the Ethernet port of the ARM-104_v3 ADSL2/2+ Router supports
auto-crossover capability.
!
RESET Button:
Reboot & Restore the ARM-104_v3 ADSL2/2+ Router to factory defaults.
!