AirLive ARM-104 v3 - Manual (Page 27)

AirLive ARM-104_v3 ADSL2/2+ Router 21
Chapter 4 Device Administration
For your convenience, an Administrative Utility has been programmed into ARM-104_v3 ADSL2/2+ Router.
This chapter will explain all the functions in this utility. All the ARM-104_v3 ADSL2/2+ Router based
administrative tasks are performed through this web utility.
4.1 Login
To access the ARM-104_v3 ADSL2/2+ Router Configuration screens, follow the following steps will enable
you to log into the ARM-104_v3 ADSL2/2+ Router:
1. Launch the Web browser (Internet Explorer, Netscape, etc).
2. Enter the ARM-104_v3 ADSL2/2+ Router default IP address (Default Gateway) http://192.168.1.1
in the address bar then press Enter to Log in.
3. Entry of the username and password will be prompted. Enter the default login “Username” and
“Password”: The default login Username of the administrator is “Admin” , and the default login
Password is “airlive” .
“Username” and “Password” can be changed after login. Refer to the Tools configuration
section for further instruction.
!
; Note that the Username and Password are case sensitive.