AirLive ARM-104 v3 - Manual (Page 120)

AirLive ARM-104_v3 ADSL2/2+ Router 114
4.5.4 TOOLS - Update Gateway
Update Gateway: Firmware is the software that controls the ARM-104_v3 ADSL2/2+ Router and also
provides the user interface that is subject of this manual. The Firmware resides in the ARM-104_v3
ADSL2/2+ Router internal Flash memory; currently loaded firmware version can be found under STATUS Æ
Product Information.
Note: It is recommends that you back up your configuration before doing a firmware upgrade. After the
upgrade is complete, you may need to restore your configuration settings.
To access Firmware Updates, click on TOOLS Æ Update Gateway. The following window screen will
pop-up.
„ Select a File: Click on the Browse… button to locate the Firmware or update image file from your
computer's hard drive.
„ Update Gateway: Click the Update Gateway button to upgrade your ARM-104_v3 ADSL2/2+
Router. The system will be restarted automatically after the Firmware/Image is successfully
uploaded. You will need to reconnect again to configure your setup.
„ Get Configuration: You may download your configuration file from the system by clicking Get
Configuration. Follow the instruction and save your configuration file in your hard drive.
Note: When uploading Firmware/Configuration File to the ARM-104_v3 ADSL2/2+ Router, it is
important not to interrupt the Web browser by closing the window, clicking a link, or loading a new page.
If the browser is interrupted, it may corrupt the upgrading process. When the upload is complete, your
ARM-104_v3 ADSL2/2+ Router will automatically reboot and restart. The upgrade process will typically
take about 1~2 minutes.