AirLive ARM-104 v3 - Manual (Page 18)

AirLive ARM-104_v3 ADSL2/2+ Router 12
2.3 Connection Mechanism:
This section describes the hardware connection mechanism of ARM-104_v3 ADSL2/2+ Router on your Local
Area Network (LAN) connected to the Internet, how to configure your ARM-104_v3 ADSL2/2+ Router for
Internet access or how to manually configure your Internet connection.
You need to prepare the following items before you can establish an Internet connection through your
ARM-104_v3 ADSL2/2+ Router:
1. A computer/notebook which must have an installed Ethernet Adaptor and an Ethernet Cable,
2. ADSL/ADSL2/ADSL2+ service account and configuration information provided by your Internet Service
Provider (ISP). You will need one or more of the following configuration parameters to connect your
ARM-104_v3 ADSL2/2+ Router to the Internet:
a. VPI/VCI parameters
b. Multiplexing Method or Protocol Type or Encapsulation Type
c. Host and Domain Names
d. ISP Login Name and Password
e. ISP Domain Name Server (DNS) Address
f. Fixed or Static IP Address.
Figure below shows the overall hardware connection mechanism of your ARM-104_v3 ADSL2/2+ Router .