AirLive ARM-104 v3 - Manual (Page 121)

AirLive ARM-104_v3 ADSL2/2+ Router 115
4.5.4.1 Update Gateway Procedure
Use the following procedures to update firmware for your ARM-104_v3 ADSL2/2+ Router.
1. Click Browse and select the file to update. The file name will appear in the Select a File field.
Note—The file size should not exceed 3.5MB.
2. Click Update Gateway. The status of the uploading will appear at the bottom of the screen. When the
upload is finished, the ARM-104_v3 ADSL2/2+ Router will reboot and you will be prompt to log in again.
3. Enter your Username and Password to log back in.
4. If you want to make sure the firmware is properly upgraded, go to Status /Product Information and
check on the Wireless Firmware version information on the Product Information screen
5. If you would like a copy of the configuration file (config.bin) saved to the ARM-104_v3 ADSL2/2+ Router
flash, click Get Configuration to download it.