AirLive ARM-104 v3 - Manual (Page 119)

AirLive ARM-104_v3 ADSL2/2+ Router 113
4.5.3 TOOLS - User Management
User Management: The User Management page enables you to change your User Name and/or Password.
It is recommended that you change the User Name and password from the default Admin to ensure the
security of the ARM-104_v3 ADSL2/2+ Router.
For security reasons, the router has its own user name and password. Also, after a period of inactivity for a
set length of time, the administrator login will automatically disconnect. When prompted, enter the router User
Name: Admin and the router Password: Admin to log in.
NOTE: If you forget your user name and password, access to the ARM-104_v3 ADSL2/2+ Router can only
be gained by resetting the unit to factory defaults. Pressing the “Reset” button for 10 seconds, the LED
indicators will turns OFF and ON again indicates that the Reset process is successfully done .
„ User Name: “Admin” is your default user name. You can enter your new user name here.
„ Password: ”Admin” is your default password. You can enter your new password here.
Note: If you forget your password, you can press and hold the reset to factory default button for 10
seconds (or more). The ARM-104_v3 ADSL2/2+ Router will reset to its factory default
configuration and all custom configuration will be lost.
„ Confirm Password: Enter your new password here again to confirm.
„ Idle Timeout: The default is 30 minutes. You will need to log back onto the ARM-104_v3
ADSL2/2+ Router if it is been inactive for 30 minutes. You can change the timeout here.
„ Apply: Click Apply to complete the setting.
„ Cancel: Click Cancel to ignore all the changes.
„ To complete and save the setting, click Save All after clicking the Apply button.