AirLive ARM-104 v3 User Manual
Page 51
AirLive ARM-104_v3 ADSL2/2+ Router
45
4.3.1.1.3 New Connection - Static Connection Setup
Static: When Static mode is selected, the following screen will pop-up. Most Internet users are
provided with a dynamic IP address by their ISP for each session, however certain situations call for a
Static IP address. Static is used whenever a known static IP is assigned. The accompanying
information such as the Subnet mask and the gateway should also be specified. Up to three Domain
Name Server (DNS) addresses can also be specified. These servers would enable you to have access
to other web servers. Valid IP addresses range is from 0.0.0.0 to 255.255.255.255
Name: Enter the Static connection name. The name must be unique and must not contain spaces
and must not begin with a number.
Type: Connection Type : Static.
Sharing: Select “Disable”, “Enable” or “VLAN” sharing. Default setting is “Disable”. The VLAN
needs to be selected to create VLAN.
Options: Click to enable “NAT” and/or “Firewall” functionality. Default is “Enable”.
VLAN ID: If “VLAN” is selected, manually enter the “VLAN ID” and select “Priority Bits” from
the drop down manual.
Priority Bits: Priority is given to a VLAN connection from 0-7, 0 being the highest priority.