AiM MyChron3 XG Log - Manual (Page 7)

The Keyboard
VIEW
MEM
ok
quit
USB
>>
<<
MENU
The Keyboard is composed of four push-buttons and it is used to configure the
instrument, to recall recorded data and to clear the internal memory.
The four pushbuttons are used for:
MENU/<< Used to enter configuration mode and to switch to previous
configuration option; also used to turn on/off backlight during a test.
>> Used in configuration to switch to next option; also used to switch
between the 4 analog inputs (temperatures and pressures).
MEM/OK Used to confirm a configuration, to retrieve recorded data and to
see the best lap time.
VIEW Used to exit configuration mode without saving, or to switch the
display from “digital RPM” value to “battery voltage”, to “best lap
time” or to “vehicle speed”.
The gauge automatically switches ON/OFF when the user switches on/off the
car’s (bike’s) electric switchboard.
To run the system in DEMO MODE, while holding down button MENU/<< and >>,
press button VIEW.
In the middle of the keyboard, protected by a plastic cover, it is located the
instrument’s USB port (used to connect the instrument to a PC).
7