AiM MyChron3 XG Log - Manual (Page 25)

• In this case you cannot acquire split times because the track is not
equipped with additional lap transmitters. It is recommended to set the
following values:
o Split’s number = 0;
o Beacon obscuring time: please set a time lower than your best
lap time. In this example, the best lap time is 1’ 25”: you should
set, for instance, 1’ 10”.
Example 2) The track is equipped with more than one lap transmitter but
you do not wish to capture split times
Intermediate 2:
Time 50”
Intermediate 1:
Time 30”
Start/Finish
Lap time 1’ 25”
• As the track is equipped with more than one transmitter and you do not
wish to capture split times, please set the following parameters:
o Split’s number = 0;
o Beacon obscuring time: please set a time lower than your best
lap time and greater than the time elapsed at the last
25