AiM MyChron3 XG Log - Manual (Page 36)

Speed unit of
measure
This function sets the speed’s unit of measure; the user can
choose between km/h and Mph.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
SPEED UNIT
Then push MEM/OK to enter EDIT MODE and use button
MENU/<< till you don’t see the proper unit of measure.
To confirm your choice push button MEM/OK; press button
VIEW to discard the changes.
Pressure unit
of measure
This function sets the speed’s unit of measure; the user can
choose between Bar and PSI.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< till you see
Pressure unit
Then push MEM/OK to enter EDIT MODE and use button
MENU/<< till you don’t see the proper unit of measure.
To confirm your choice push button MEM/OK; press button
VIEW to discard the changes.
Message
language
MyChron 3 Plus/Gold/Gold XG text can be displayed in
English, Italian, German or French.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
MESSAGE LANGUAGE
36