AiM MyChron3 XG Log - Manual (Page 39)

By pressing button >> it is possible to shift your MyChron 3
Plus/Gold/Gold XG to another display page, where you can
see the other two analog inputs.
Moreover, together with the channel’s values, the display shows
two further information:
• an icon (T or P), to identify the sensor type: “T” stands
for “temperature sensor”, while “P” stands for “Pressure
sensor”. If you connected a temperature or pressure
“custom sensor” (please refer to paragraph “Customize
sensor”), the display will show the corresponding icon
(T or P). Otherwise, if you connected a generic “custom
sensor” (i.e. a custom sensor which does not belong to
the temperature/pressure sensors), no icon “T” or “P”
will be shown.
• A number (from 1 to 4), which identifies the sensor
number.
For instance, if you connected a temperature sensor on channel
1, a “generic custom sensor” on channel 2, a pressure sensor
on channel 3 and another temperature sensor on channel 4,
your MyChron 3 Plus/Gold/XG will show, in the first display
page, “T1” for channel 1 (it is the first temperature channel),
“1” for channel 2 (it is the fist “generic custom sensor”), “P1”
for channel 3 (it is the first pressure channel) and “T2” for
channel 4 (it is the second temperature channel).
39